Many people buy the same tile for laying in the toilet, kitchen and bathroom.
Such a decision is fundamentally wrong and can lead to adverse consequences.
A specific type of material is designed for each of these rooms. The main nuances of styling will be discussed in today's article.
In this room, tiles are usually mounted on the wall near the sink and stove.
Certain requirements are put forward for this material, which affect the further operation:
1) It is important to choose products designed for wall mounting. As a rule, they have the smallest weight, which means they will last longer in suspension.
Note! If there is a need for laying on the floor, it is better to give preference to products of the 3rd hardness class.
They are able to withstand large mechanical loads. After all, the kitchen is one of the most “lively” places in the house, where there are always a lot of people.
In addition, floor tiles must be resistant to abrasion damage.
Therefore, for this purpose, it is recommended to choose models without a picture.
2) Wall tiles must have a special coating that will provide protection from exposure to harmful chemicals. This fact is relevant for the kitchen.
3) In the kitchen, you can use both ceramics and natural stone. Both products have excellent performance, durability and durability.
Important! Products marked with AA are most suitable for use in kitchens.
They are easy to wash, durable and resistant to high temperatures.
For such rooms, it is recommended to choose a tile that has the following properties:
- Resistant to mechanical stress. As a rule, the product is laid on the floor, which means it must withstand human weight. Ceramics are suitable for installation. Such models are one of the cheapest on the market.
- Prefer non-slip models to avoid future injuries.
Additional Information! Mounting on the wall is slightly more complicated than on the floor. Consider this circumstance before carrying out repairs.
Must meet the following requirements:
- The product must have a high coefficient of friction of at least 0.75.
- As a rule, on such a tile you can not slip and get injured. Therefore, it is better to give preference to matte models for use in the bathroom.
2) Must have reduced moisture absorption. One of the most important parameters of tiles for the bathroom. It is best if this indicator is in the range of 3 to 10 percent.
Note! Ceramic or porcelain is the best choice for bathroom applications.
These materials have a low moisture absorption rate, as well as a high coefficient of friction.
Thus, the article presented the main features of tiles for the kitchen, toilet and bathroom.
Are you ready to listen to the recommendations outlined above? Share your opinion in the comments.