Puzzled by breeding animals from the rabbit family, it is necessary to create a favorable environment for their habitation. The usual place for keeping rabbits at home is the cage. During the design of this product, it is possible to implement the main principles of the mammals' comfortable living: spaciousness, cleanliness, coziness.
Design stage: product design development
The implementation of the idea "on paper" is one of the most important conditions for solving the problem before building a cage for rabbits on their own. Having engaged in the synthesis of various solutions, you should seriously approach the choice of the overall dimensions of the structure. As standard data, you can use the following parameters of the space, designed for two animals :
- length - 240 cm;
- width - 65 cm;
- height front / rear - 60/35 cm.
At this stage, it is necessary to provide for a number of constructive decisions of the organizational plan :
- concentrated feed system;
- compartment for coarse and green feed;
- nesting compartment;
- metabolic system.
Experienced rabbit breeders also strongly recommend that cells be placed slightly above floor level (0.5 - 0.8 m) in order to ensure the safety of animals from predators (rats and mice) and make the maintenance process more convenient .
A universal way, or How to build a comfortable cage for rabbits yourself. A simple design, the implementation of which is subject to everyone
The two-section structure of the product is the most successful and, therefore, the most common. Both cells consist of a stern and a nest located on the periphery and having a continuous bottom.
In the aft compartment, the cage is divided into two sections by means of a feeding section for feeding. The grid serves as a supporting surface here. The front part is formed by frame partitions and four doors, two of which are solid.
Before you build your own cage for rabbits , you need to acquire these elements:
- timber (30x40);
- plywood or OSB (10 - 15 mm);
- fasteners (screws, nails, hinges).
The technique of building a double cell is a derivative of the technology of frame construction and is subject to its basic principles . The product is created in the following sequence :
- from pre-sawn timber, the frame is assembled;
- the combined supporting surface is assembled: grille + plywood;
- back and side walls are formed from OSB;
- the cells are equipped with a combined feed section;
- formation (creation of a “window” for the passage of the rabbit) and fastening of partitions between the stern and nesting parts;
- assembly of the upper section;
- Front organization: assembly and fastening of doors.
If the operation of the cage is planned outdoors, it is necessary to equip the product with a waterproof roof - lay roofing material and slate on top of plywood or OSB.
There is an even more simplified option - a single cell . In this case, the need for a partition disappears, and the number of doors is reduced to two. The feed loading section is based on the front. Additionally, it is possible to attach the uterine compartment to one of the ends of the cell, having previously cut out the window.
Owners of large farms need to provide separate premises for the separate keeping of males, young animals and pregnant rabbits. In such cases, a multi-story construction is justified.
After the base of the cage for rabbits is built , it is necessary to install the system for removing the final products of the digestive system of animals. There are two ways to organize automatic withdrawal:
- install in the immediate vicinity of the mesh a container repeating the geometry of the floor;
- attach a truncated cone to the bottom of the cage.
The disadvantage of the first method is the increased frequency and duration of maintenance cycles, since the waste still needs to be moved to the final tank manually. The bunker can be profiled so that metabolic products move directly into the tank intended for disposal.
Cage construction is a good method for organizing a spacious and comfortable space without the main source of a negative effect on the health of rabbits - drafts.
Despite the large number of specific structures, a two-section structure is widely used in household conditions. The product becomes even more practical after the retrofitting of the bunker-type metabolism removal system.