The mixer is a very important and integral part of every house or apartment. A breakdown of this appliance stops the cooking, washing and much more, so the breakdown must be fixed as quickly as possible. Right now we’ll figure out what breaks and how to fix it! Read carefully!
Reducing the volume of the jet from the crane - the main cause of the breakdown becomes a blockage of the aerator. This nozzle is attached to the end of the gander, and the gander is responsible for the timely exit of water from the tap. It is very easy to troubleshoot: remove the aerator from the spout and flush it.
Crane leakage - most likely the cause of the breakdown was an “unidentified object” stuck between the disks. Therefore, water continues to flow into the gander, despite the fact that it is closed. To eliminate the malfunction should disassemble the mixer.
Water leakage from under the valve - usually a pin that has flown out of the drain, is the cause of the breakdown in this situation. How to fix? First shut off the water and remove the flywheel from the valve head, pull out the fallen pin. Remove the old hemp and replace it with a new one, so that the stem snaps into place as it should. If hemp is not needed, reinsert the pin.
Leakage from under the spout nut - most likely the rubber gasket has simply worn out, remove the union nut from the spout and remove the old rubber ring. Replace the rubber ring with a new one.
Contactless faucets are often the most durable, but it is worth remembering that there is no device in the world that does not break. After a long period of operation, sensors can break down, which are responsible for the timely switching on and off of water when approaching the tap. Most likely you will have to turn to a specialist to deal with the problem, you need a person who knows this kind of technique very well.