If you want your house to be warm and cozy in the winter cold, it is important not only to warm it, but also to maintain the optimum temperature by removing heat loss. Apartments with bad windows are more prone to this problem. For you, we have prepared 5 practical tips on how to insulate them for the winter and thus protect yourself from the cold.
It is worth considering the fact that the heat leaves the room in the form of infrared radiation. Standard glass has a low permeability for such beams. If it is dirty, heat loss increases.
For this reason, in order to maintain a stable temperature in the room, it is important to thoroughly wash the windows before the onset of winter. In spring, such a procedure will also not be superfluous, because otherwise less sunlight will penetrate into the rooms. It is best to wash glass with a solution of ethyl or ammonia. Such a simple method will allow you to maintain the desired temperature and prevent heat leakage.
Using heat reflecting film
Sometimes you can observe a situation when condensation forms on cold windows. The reason for this is the lack of thermal insulation properties. To reduce heat loss, you can install shrink film, which has energy-saving properties. It is mounted on the inside of the window structure.
The film prevents the departure of infrared radiation, and also forms a certain heat-insulating layer in the form of an air gap. For installation, it is necessary to first clean the frame from dirty spots and dust, as well as grease. Then the film is glued to the glass with tape. Turn on the hair dryer and direct the hot air onto the film canvas, and it will stretch itself, and then smooth. She copes with her task perfectly.
If the window frames are made of wood, then over time it can warp and the sealing will be broken. Gaps are formed through which heat leaves the room. It is worth checking the entire perimeter and removing glazing beads. Remove the glass from the frame and wash it. Process the perimeter with silicone sealant, press the glass and fix them with glazing beads.
To eliminate invisible gaps between the glass and the frame, molten paraffin can be used. In a liquid state, it can penetrate into any gap. To do this, an ordinary candle is melted with boiling water, paraffin is filled with a syringe and the gaps are filled with it. In order not to act chaotically, it is preliminary worth noting all the places that need to be sealed.
The use of tubular fillers
The cause of heat loss quite often is a loose fit of the frame. To fix the problem, it must be sealed. In this way, the gaps through which cold air enters the room will be eliminated.
For this purpose, you can use a self-adhesive tube, which is a good sealant. If the wood has a paint and varnish coating, then gluing is easy to perform. It is only necessary to remove the protective paper and press the seal itself to the previously washed frame. For reliability, it is better to use a silicone sealant, which is reliable and durable.
These simple tricks will help insulate the windows and maintain a comfortable temperature in the house or apartment.