LED ceiling chandeliers for the home with a control panel - features, assistance in choosing
LED ceiling chandeliers for the home have appeared on the lighting equipment market quite recently. However, the variety of dimensions, shapes, original design and a number of advantages allowed them to become very popular products all over the world and step by step to displace classic lighting designs equipped with halogen or fluorescent bulbs.
In this article you will learn about:
main features of LED lamps;
technical characteristics of various models;
how to install an LED chandelier with a control panel;
buying tips and a list of popular manufacturers in the CIS.
LED ceiling chandeliers for the home, their advantages and disadvantages
LED ceiling chandeliers for the home are suspended or ceiling devices, where the role of the lighting source is assigned to replaceable lamps or simply LEDs. The device presents a semiconductor crystal used to convert electricity to light. Manufacturers mainly offer models in such stylistic directions as:
They fit perfectly into the interior of the kitchen, nursery, living room or bedroom.
Chandeliers based on LED technology have many advantages, unlike classic light sources. Among the key advantages include:
Saving electrical energy.
Electricity consumption is ten times lower than that of lighting equipment with incandescent bulbs, and three times less than that of energy-saving lamps
The LED ceiling chandelier is turned on and off not only with the switch on the wall, but also with the control panel.
Insignificant release of thermal energy, there is no heating of the case
Such devices are recognized as environmentally friendly.
Long service life.
About eleven years of continuous illumination of chandeliers equipped with built-in LEDs. The period of operation is about fifty thousand hours.
Modern laconic appearance and a variety of forms make these lamps suitable for almost any room.
Bright even illumination in the absence of flicker characteristic of halogen chandeliers and incandescent bulbs
An LED lamp with a power of twelve watts has a luminosity corresponding to a one-hundred-watt incandescent bulb.
LED ceiling chandelier with control panel allows you to control the intensity of lighting.
Despite such significant advantages, this equipment has its drawbacks. In particular, if the LED lamp malfunctions, it must be changed. It is enough to burn out a single LED, as all the others are turned off, since there is a serial connection between them.
Classification by installation method
LED chandeliers are represented in a large number of varieties, depending on how they are installed. In particular, you can find built-in, wall-mounted, portable and even floor models. In this section we will talk about pendant and ceiling LED chandeliers, as they are in great demand and have a number of interesting features.
Pendant LED Chandelier with Remote Control
Suspended ceiling LED chandeliers for the home stand out among a large number of models in that they are both economical and convenient equipment. The light emitted from the LEDs helps to focus on a particular attribute of the interior or a specific room area.
The competent arrangement of such products is not in the center of the ceiling surface, but over a certain area. If you have a lighting fixture in the kitchen, you can talk about the work surface, while in the hallway such lighting equipment is located next to the wardrobe. This rule applies to bathrooms, where it is best to place a chandelier with a closed ceiling.
Pendant lights in the traditional implementation are height-adjustable equipment. You can fit chandeliers in any room, regardless of its size. It is generally accepted that the greater the height of the ceiling, the more extended it is necessary to make a suspension. Another difference is compositional and design solutions. There are laconic varieties, unique chandeliers with multi-colored shades of intricate shapes, functional models for zoning and spot lighting. Based on the design, they can be used for installation in:
Remote control LED ceiling chandeliers have been widely used since the end of the eighties. Their distribution was associated with the growth of Japanese technology, which contributed to the creation of eye-catching lighting in an apartment and a significant reduction in the cost of electric energy. LED ceiling equipment is perhaps the most popular design direction. If you decorate the ceiling with LED chandeliers, you can put into practice the most innovative solutions.
Specifications of LED Chandeliers for Home
Recently, ceiling LED chandeliers with a remote control for the home have been widely used as sources of artificial lighting. In recent years, due to the constant development of technologies, it has been possible to significantly reduce the cost of LEDs and products where they are used.
Now such light sources are the best solution for creating lighting due to increased efficiency and long life. LED chandeliers vary in size and type of cap, glow temperature and operating voltage, which can range from twelve to 220 volts. Below we will take a closer look at the technical specifications.
The power of LED equipment is indicated in the same way as standard equipment - in watts, but here the number is much smaller. The bottom line is that such devices operate at a much lower voltage, therefore they consume significantly less power. At the same time, the luminous flux is not inferior to standard lamps.
How to understand what power device is comparable to classic fixtures? Manufacturers claim that you can get the equivalent power of a LED chandelier by multiplying the indicated number by ten. Thus, a four-watt LED bulb is identical in terms of power to a forty-watt standard incandescent lamp. In fact, you need to multiply five or six times. The table below shows the correspondence of the power of incandescent bulbs, fluorescent light sources and LED chandeliers:
Number of lamps
The number of bulbs in a LED ceiling chandelier for a home can be completely different. It all depends on what tasks are set for such lighting equipment:
for the bedroom, the best option is soft diffused lighting or directional light;
for the living room, as an addition to the general illumination, you can designate interior elements and decorate the room with a floor lamp, sconce and table lamp;
for the kitchen space, you can create additional lighting for the work area.
Depending on your goals, you can choose from one to several fixtures.
An important indicator when choosing LED chandeliers is the area of lighting. Therefore, deciding to order such equipment, it is necessary to take into account the shape of the room. In a square room, the light is distributed evenly, while in a rectangular room, a product of a slightly higher power or the installation of auxiliary light sources is necessary. In particular, several interior table lamps or a floor lamp can take on the functions of secondary equipment where there is not enough light created by the main source of lighting. Ceiling LED chandeliers with a control panel should be selected not only in size, but also in the area that they are able to illuminate.
Type of lighting
Amount of light (W per sq m)
up to 12 W per sq m
Toilet, bathroom, kitchen, children
up to 18 W per sq m
Living room, study
20 W per sq m
Here the trivial rule applies - the higher the brightness of the glow is needed, the larger the shape of the lamp should be. A less powerful chandelier is proportionally smaller.
If you are going to purchase such lighting equipment, you should evaluate its dimensions, since it directly depends on how powerful and high-quality lighting source you get. Note that traditionally the dimensions of such lighting equipment are smaller than incandescent and energy-saving bulbs, so you can effectively decorate the interior with it.
LED ceiling chandelier for home with remote control
LED chandeliers with remote control not only allow you to control the level of illumination in the room without additional body movements, but also contribute to the choice of different modes of operation (depending on configuration). The happy owners of such a technique, after a short period of time, make sure of the literacy of their own choice.
You will be able to control the illumination anywhere in the room, and for this you will not need to bother somehow. This is very important for people with reduced legal capacity, in particular, people with disabilities and elderly citizens. Due to electronic control, you can also change modes, so you can create the required environment in the room for completely different situations.
Connecting an LED Chandelier with a Remote Control - Installation Tips
Many people, performing repairs in their apartment and finishing, seek to replace old chandeliers with modern LED lighting equipment. Installation of the LED chandelier is carried out on a special cross. If you are dealing with a concrete window sill, the crosspiece can be fixed with dowel nails. In this case, first you must use the puncher to make holes of the required diameter in a certain place.
With a wooden ceiling, everything is pretty easy. You will need to attach the cross to the ceiling surface using self-tapping screws. If you have a plasterboard ceiling, it is advisable to initially provide for the installation of an LED chandelier and prepare a metal profile at the mounting points. In this case, such a cross can be screwed with metal screws directly to the profile through drywall.
When you have fixed the cross on the ceiling, you can start connecting the LED chandelier. First you need:
unpack all components;
make sure of their integrity, configuration;
study each item in detail.
The LED ceiling chandelier with a control panel is fixed to the cross with four mounting bolts, for which it must be tightly pressed against the ceiling.
Lift the LED chandelier to the ceiling surface, connect it to the mains, and isolate the exposed contacts at the connection points. Mains voltage should be disconnected so that you are not hit by electric shock.
We screw in additional elements (ruffles) and LED bulbs for the chandelier and perform a functional test of lighting equipment. Checking all modes is carried out using the remote control.
If all modes work, you can begin the final stage of installing the LED chandelier. It is about assembling decorating components. When installing the LED chandelier on the ceiling, you must get rid of the protective film on the mirror base. Further, strictly following the instructions, you will need to install each decorating component. You must hang them step by step.
These works require a careful approach, since there is a risk of damage to glass jewelry. After fixing all the components in their places, you will need to wipe the base with a clean cloth from dust and fingerprints that appeared during the assembly process. This completes the installation of the LED chandelier.
What to look for when choosing
When choosing an LED ceiling chandelier for a home, several key characteristics must be taken into account simultaneously:
Stream of light. The larger the value of this parameter, the greater brightness the chandelier will provide. Therefore, when choosing it is important to correlate the flow of light and the dimensions of the room (height, area).
Colour temperature. This parameter contributes to the assessment of the quality of illumination. For home conditions, the best option would be models with diode-based bulbs having a light temperature in the range of 2700-3000 K. (warm yellow light). Neutral daylight (4000-6500 K) is ideal for office space.
Directivity or diffusion of lighting. It is important to understand that LEDs can shine directionally or create uniform light when using special diffusers. When choosing chandeliers with open shades, the glow will be directional.
Product design must be in harmony with the overall style of the room. Given that the product based on LEDs is a group of central ceiling lights, it is necessary to carefully select the design of the ceiling, because the technique of this type is constantly in the spotlight.
Fastening mechanism. It should be based on whether the installation will be performed on a ceiling on a ceiling or a suspended structure.
Protection level. For an entrance hall, a drawing room and a nursery, where there is no water source, unprotected chandeliers (IP20) are used.
TOP 5 LED Chandelier Manufacturers
Among the manufacturers of LED ceiling chandeliers, the most popular are companies such as:
An experienced participant in the domestic market, which appeared on it in 1999. The company specializes in import and manufacturing, so the cost is low. Among the advantages can be noted a luxurious choice. The organization has a great site and competitive prices.
A major seller of lighting equipment. The products have an original design that guarantees a wider angle of illumination.
Reliable company, its products have the necessary certificates. The range includes high-performance bright chandeliers for home use with an E27 base and a power of about 48 watts.
LED ceiling chandeliers for the home of this manufacturer have a price slightly higher than that of competitors. Among the unique models is a lamp with a color rendering index (RA) of more than 90.
It has been on the Russian market for at least seven years; it provides quality documentation for products, even indicating the model of diodes. Information about the luminous flux is true.
LED Ceiling Chandelier - Photo Options in the Interior