Will the steamer replace the iron? Despite the many advantages, deciding to purchase it is not easy. Our article talks about steamers for home use. Which is better, reviews 2019-2020 and a lot of other information you will find below.
The structure of the article is divided into 3 parts:
- general information about steamers, features of choice;
- list of the best models 2019 - 2020;
- summary table of characteristics of the presented models.
To navigate to the desired part of the article, use the item navigation.
What functions does the steamer perform?
The steamer is a steam ironing device. It smoothes a large amount of fabric without an iron. This is much faster: it is not necessary to remove the item from the hanger, put it on the ironing board and push it into place, again crushing the fabric. The fabric is steamed right on the hanger.
The steamer is ironing things that are impossible for the iron - suits made of delicate fabric, silk, wool. Steam penetrates the fabric without damaging the soft structure, since its temperature is much lower than the surface temperature of the iron.
The steamer is also used in soft cleaning. Steam soaks dirt deep in the fabric, helping to remove stubborn stains. He will not get rid of paint or solvents, but he will completely cope with a stain of champagne on a wedding dress.
- for the sake of time, when ironing a large number of things;
- with delicate fabric;
- in cleaning delicate fabric from dried spots;
- in softening any other materials amenable to steam (paper, cardboard, wallpaper).
He does not always perform the above functions well: ironing a silk shirt is easier with an iron, and the device will not remove complex spots at all. Remember that the steamer is far from omnipotent! Neither a washing machine nor an iron can be completely replaced.
Types of steamers
Steamers are divided into two varieties - floor and manual. They vary in size, power and volume of the tank. Therefore, before choosing, decide which tank suits your requirements.
Floor-standing are a tank with a heating element and an evaporator with a hose that conducts steam. Evaporator - a metal die with a flat surface and openings.
Handheld is lighter and more mobile, but has a small capacity and produces little steam. The selection plane is larger and occupies the entire lower surface of the steamer.
The main difference is in the volumes of steam. The floor wins due to the capacity of the evaporator and the larger capacity, but the pressure on the hand is often stronger, since the vapor passes a smaller distance to the fabric.
It is not easy to understand which steamer is best for home use. Reviews 2019 - 2020 on the side of floor options with more power and efficiency. Manual models are less and less popular.
What to look for when choosing a steamer?
There are several basic characteristics that affect the choice and use of the steamer:
- steam head;
- power consumption;
- working hours;
- available operating modes;
- price and brand.
Power affects the amount of steam released. The main part is the heating element. It evaporates water, heating up to 200-300 degrees. Water is supplied continuously, otherwise, instead of steam, a dispersion of water arises due to a sharp liquid.
Steam condenses in the tank and is released with pressure. The temperature of the heating element drops, and it again needs to be heated. The greater the power of the element, the faster heating will occur - power directly affects the amount of steam generated.
When choosing, give preference to units with more power. It is not required for domestic needs, but the stock expands the capabilities of the steamer in unforeseen situations.
Pressure is related to power and distance to tissue. Therefore, even with low-power steamers, the pressure is stronger than with strong floor units.
The pressure is not indicated by the manufacturer, so it shows itself already in operation. The stronger the pressure, the deeper the vapor penetrates into the tissue and the faster it evens out its structure.
Energy consumption depends on power. The higher the power, the more electricity goes into warming up. Regardless of the volume of steam, high power always “eats” more energy.
Only blockers that cut off power when the set temperature is reached save from overruns. Many models have them, so do not worry about energy overruns.
Operating time depends on the size of the tank. The more water it holds, the longer the steamer runs without refueling. The tank is more voluminous in the floor, less - in the hand. Endurance is defined by power: the higher it is, the faster the water is consumed.
The choice depends on your needs. If you need quick ironing, a handheld steamer with a small volume is more convenient. If there is a lot of fabric, buy a floor to save on refueling.
The operating modes allow you to adjust the amount of steam and its feed rate. As a rule, steamers have two or three operating modes and an on / off button. This amount is enough in full operation.
Price and brand
The brand indirectly affects the quality of performance. There is no direct dependence, but the eminent company will not take risks by releasing low-quality or weak steamer. Cost increases depending on capacity, brand name and quality of performance.
Steamers for home use: which is better - customer reviews
Below are the most popular steamers for home use. Which is better, reviews 2019 - 2020 and technical specifications will help to make the right choice of model.
Kitfort is a domestic company located in St. Petersburg. The KT-901 model has 1600 watts of power and a 1.6-liter tank capacity: it is enough for half an hour or an hour of continuous steaming. The design is made of plastic, but at a low price you can not find more. The cost of 4000-5000 rubles can save a lot on the steamer.
The main disadvantage of the steamer is its low weight. The built-in stand, useful in installing things, is unstable under too heavy a cloth.
Bought it to replace a broken iron. Ironing is not as good as iron, but it allows you to spend less time. The rack is unstable - it should be held by hand, which is not always convenient in work.
Rowenta Roll & Press IS6300D1
Rowenta - quality products with many nice features. Power is not much less - 1550 W, capacity - 2.4 liters. The case is plastic, with weighting agents in the area of the legs. Cost ranges from 9000 to 12000, depending on the store and the region.
A separate plus is a large ironing board, attached to replace a conventional hanger. It provides various mounting methods to expand the functionality of the steamer.
A very good steamer - they completely abandoned the iron with it. Very convenient hanger - secures trousers, shirts, suits and dresses, without shoulders or other tricks. There used to be a cheaper model, compared to it, the volume of the water tank is simply amazing.
Supra is a Chinese brand of household appliances. The SBS-166 has a power of 1650 W and a tank volume of 1.5 liters, which produces a fairly tight jet. The case is made of plastic, with a weak bar, but the price makes up for the shortcomings - only 2.5-4 thousand rubles.
The main flaw is the poor build quality and problems with the bundle: sometimes the declared nozzle does not appear in the sets. Despite this, the steamer is good for its money.
Acquired for 3000 rubles, the money fulfills one hundred percent! Steams - and nothing more is needed. A nice adjustment is not according to incomprehensible steps, but according to the specific types of fabric with which the work is going. The clothespin is also comfortable, has not failed yet.
Polaris PGS 1518CA SteamProfi
Polaris is a Russian company specializing in the production of small household appliances. Products meet the standards of the Russian Federation, but are not always assembled from quality materials.
PGS 1518CA is a manual steamer with a decent supply of water, which makes it very different from other models. A capacity of about 250 ml is an impressive mark for hand-held devices. The power of the steamer is 1500 W, the auto-off function is built-in: the device turns off after 8 minutes of inactivity.
Disadvantages - the unusual layout and the small size of the iron itself, which makes it difficult to steal sofas and large bedding. Cost from 2000 to 4000 pleases: Polaris is one of the most affordable steamers.
Cheap and very light - it seems to be good, but it seems to be bad. The volume of water is enough for 10-15 minutes of work, then you have to add it, but it is convenient to walk around the house with it, without carrying a heavy station. There is enough power - it steams well dense furniture.
Tefal Access Steam DR8086E1
This model is notable for its capacious battery. It makes the steamer independent of the network - in the summer, the steamer is convenient to take to the street.
Access Steam has a 1,500 W heater and a 200 milliliter tank. The device turns off automatically after 8 minutes. The steam density is inferior to floor options, but stands out among hand-held models.
The main drawback is the cost from 5000 to 8000. The price is high, but it pays off for quality and convenience.
Expensive, but wonderful - the battery makes operation as convenient as possible in any situation. The battery is fully charged in 2-2.5 hours, leave it overnight - it does not heat up on charging. There is enough water for 10-15 minutes, after which you have to add.
Steamers for home use - a comparative table of the advantages and disadvantages of the considered models
The table below compares the steamers for home use and allows you to choose the model that suits your needs.
|Kitfort KT-901||Rowenta Roll & Press IS6300D1||Supra SBS-166||Polaris PGS 1518CA SteamProfi||Tefal Access Steam DR8086E1|
|Tank volume (liters)||1,6||2.7||1,5||0.25||0.2|
|Service life from one gas station (min.)||30-45||60-90||30-45||10-20||5-20|
|Features||No||Ironing board||Customization for fabric type||No||Battery|
Video instructions for choosing a steamer for the home