Ceramic tile cutting is a very important process, which requires patience and clearly coordinated movements from the owner so that during the cutting process it does not crack or break.
Unfortunately, newcomers at this time make a large number of mistakes and spoil expensive building materials.
Therefore, in this article we will tell you about how you can cut tiles correctly, smoothly and without any chips.
A tool that will suit any beginner
Fortunately, there is currently a tool like a tile cutter. It will allow beginners to achieve maximum results in the shortest possible time, without any errors. In this article we will tell you more about everything.
The tile cutter consists of:
- The basis.
- Guides made in the form of tubes.
- Swing axles.
- Breaking knot.
But the question remains open, so how to correctly cut these products using a tile cutter? We will tell you in detail.
How to cut tiles correctly with it
This procedure with the help of such a construction tool occurs by fixing the product on its surface and conducting simple movements.
After you fix the tile, you will need to draw a line of direct type with the specially designed wheel that is located on the tile cutter and lower the lever. When you lower it, the tile breaks in the place where the cut was made.
Before proceeding directly to the work process itself, the tile cutter must be prepared. To do this, you will need to drip a little oil on its surface, where the frame of the guide type is located.
Because of this, the line that will be drawn on the tile will be clearly visible to you and this will allow you to prepare the line for the cut without any problems.
Always check if the wheel is locked firmly. If it staggers in different directions, then the cut line may not be perfectly smooth. Therefore, before starting the work itself, always check if the tile cutter is assembled securely.
The cutting type wheel, as well as other parts of this tool, may fail over time. If this happens, go to the nearest store and buy replacement parts. The installation process will not cause you any difficulties.
If the edge of the tile turned out to be uneven, then use sandpaper with a high level of roughness and grind it to the value you need.
In this article, we presented to your attention a solution to the problem when a beginner does not manage to cut tiles evenly. We hope that the information was useful and interesting for you.
And what methods do you use when you carry out this kind of construction work? Please share with us in the comments below the article! Thanks!